MKGJ-992P series stainless steel air filter reducer

一、產品簡介product introduction 

MKGJ-992P系列空氣過濾減壓器將來自空氣壓縮機0.5～1.6MPa的空氣壓力，經過濾凈化后，

可調節在0～0.8MPa范圍內任一輸出壓力值，保持壓力穩定。適用于儀表供給壓力和動力風壓的穩定裝置。其材質選用不銹鋼材質，具有防腐功能，適用于船舶，化工廠，煉油廠等腐蝕性場合使用。

MKGJ-992P series air filter pressure reducer will be from the air compressor 0.5 ～1.6MPa air pressure, after filtration and purification, can adjust any output pressure value in the range of 0 ～0.8MPa, keep the pressure stable. Stabilizer for instrument supply pressure and power wind pressure. Its material is made of high quality stainless steel and has anti-corrosion function. It is suitable for corrosive occasions such as ships, chemical plants and oil refineries.

二、產品特點product introduction

結構新穎，將過濾和減壓組合成一體，起到一儀多用的效果。

當輸入壓力和流量波動時，能保持穩定的輸出壓力；

重量輕，尺寸小，易安裝和維護；適用于儀表盤安裝和現場安裝。

適用于惡劣環境，結構簡單，牢固可靠，可用于有腐蝕性環境中。

高性能過濾元件采用不銹鋼材質，其過濾微孔*小為φ5μm可起到對空氣精密過濾的作用，有效防止氣動儀表的堵塞，延長氣動儀表的使用壽命。

安裝方便，當輸入輸出口的位置交換180度時，輸出壓力表可隨意安裝在便于觀察的位置。

調節螺釘可隨意調節輸出壓力,可作為氣動信號源來使用,不需調節時用鎖緊螺母鎖緊，有利于安全運行。

The structure is novel, and the combination of filtration and decompression is integrated into one, which has the effect of multi-purpose.

When the input pressure and flow fluctuate, always maintain a stable output pressure;

Light weight, small size, easy to install and maintain; suitable for instrument panel installation and field installation.

It is suitable for harsh environment, simple structure, firm and reliable, and can be used in corrosive environments.

The high-performance filter element is made of stainless steel. The filter micro-hole is φ5μm, which can play the role of precision filtration of air, effectively prevent the blockage of pneumatic instruments and prolong the service life of pneumatic instruments.

Easy to install, when the position of the input and output port is exchanged 180 degrees, the output pressure gauge can be installed at a position convenient for observation.

The adjusting screw can adjust the output pressure freely. It can be used as a pneumatic signal source. It can be locked with a lock nut when no adjustment is needed, which is conducive to safe operation.