BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.

STEM/DISC
Stern design provides high strength and positive disc control with standardized end connection for operator interchangeability.

STEM BEARINGS
Bearings are standard on both the upper and lower shaft to minimize torque and provide maximum stern support.

SEAT
Molded-in resilient seat provides bubble-tight shutoff to 250 psi.

Dead-End Service
The lugged body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.

TESTING
Each valve is individually tested for bubble-tight closure at 110% of full rated pressure.

BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.

STEMS
Heavy-duty, two-piece design allows for easy maintenance. Stems are secured by the use of retaining pins.

BEARINGS
Two bronze or Teflon^®* bearings are standard on 2"-12". Sizes above 12" have full-length bearings on upper and lower stems.

Stem/Disc Attachment
Rectangular drive ensures proper disc connection. No pins or bolts are exposed to flow.

Seat
Elastomer, reinforced with phenolic backing ring, enables valve to be used on pressure or vacuum service. Seat can be field replaced. Grinnell's special double seal design eliminates the need for flange gaskets. Three stem seal O-rings are molded into the the seat liner to back up the primary stem seal.

DISC
Streamlined for maximum flow and minimum seat wear. Ease of maintenance due to the elimination of bolts, pins, etc., as disc to stem connectors.

Dead-End Service
A unique patented lip, integral to the body prevents the liner from moving downstream, eliminating seat and flange leakage. This feature allows lug valve to be used in uni-directional, dead-end service applications at full rated pressure without the use of downstream flange.
 

* Teflon^®is a registered trademark of the E.I. DuPont de Neymour Company

PDF

Dimensional Drawings with New Stem Dimensions
2" - 12" WAFER Bare Stem
2" - 12" LUG Bare Stem
14" - 24" WAFER Bare Stem
14" - 24" LUG Bare Stem

Dimensional Drawings with Old Stem Dimensions
2”-12” Wafer Barestem
14”-24” Wafer Barestem
2”-12” Wafer Lever Operated
2”-12” Wafer Gear Operated
14”-24” Wafer Gear Operated
2”-8” Wafer w/ 80 psi S/R Pneumatic Actuators
10”-12” Wafer w/ 80 psi S/R Pneumatic Actuators
2”-10” Wafer w/ Electric Actuators
12” Wafer w/ Electric Actuators
Wafer Sanitary Valves

2”-12” Lug Barestem
14”-24” Lug Barestem
2”-12” Lug Lever Operated
2”-12” Lug Gear Operated
14”-24” Lug Gear Operated
2”-8” Lug w/ 80 psi S/R Pneumatic Actuators
10”-12” Lug w/ 80 psi S/R Pneumatic Actuators
2”-10” Lug w/ Electric Actuators
12” Lug w/ Electric Actuators
Lug Sanitary Valves